Quality matting for your building entrance.
Alumat Flooring Solutions offers a range of mat types to meet every need. Before making a selection, it is necessary to understand the different mat types, how they work and which one will be the best for you.
Inside Zone
Mats typically are required to remove some water and finer particles of dirt. If there is not a lot of water to remove, then the closed type of mat construction is usually best as it has a higher percentage of scraper infills, and, as there is no fall through, the underside of the mat requires no cleaning.
- 8 – 10mm deep with or without prefitted ramping. Alumat Alumat 10 I and Alumat 10 W Series.
- 15 – 20mm deep, Alumat 15 I Series for use in a mat well.
- In some areas, excess water entering the building may still be a concern, then any of the outside zone water draining mats can be used.
Alumat 10 I Series
10 mm deep. Installs into matwell or on floor.
Alumat 10 W Series
10 mm deep. Installs into matwell or on floor.
Alumat 15 I Series
15 mm deep. Installs into matwell.
Outside Zone
Some situations require more than conventional matting to handle surface water. Alumat offers two basic types.
Closed draining. Infills are combined with alternating drain channels to contain surface water away from shoe contact. More water can be contained compared with other mat types without any special installation.
- 8 – 10mm deep with or without prefitted ramping. Alumat Alumat 10 D and Alumat 10 WD Series.
- 15 – 20mm deep, Alumat Alumat 15 D and Alumat 15 WD Series.
Alumat 10 D Series
10 mm deep. Installs into matwell or on floor.
Alumat 10 WD Series
10 mm deep. Installs into matwell or on floor.
Alumat 15 D Series
15 mm deep. Installs into matwell.
Alumat 15 WD Series
15 mm deep. Installs into matwell.
Open draining. Each mat, has infill strips, alternating with open drain channels that will discharge surface water under the mat, and is capable of disposing of continuous running water. Use as part of a drainage system
Alumat 10 DO Series
10 mm deep. Installs into matwell or on floor.
Alumat 10 WDO Series
10 mm deep. Installs into matwell or on floor.
Alumat 15 DO Series
15 mm deep. Installs into matwell.